Built for Utility & Concrete Cutting
The ICS 695XL-PG Gas Powered Utility Chainsaw delivers exceptional power and portability for utility contractors, municipalities, and concrete professionals. Designed to cut ductile iron, cast iron, PVC, HDPE, masonry, stone, and reinforced concrete, the 695XL-PG provides fast, precise cutting up to 16” deep from one side.
Compatible with both PowerGrit and ProFORCE cutting chains, it is ideal for pipe taps, utility vaults, trench work, bridge repair, and general concrete cutting applications.
Applications
- Concrete Cutting
- Asphalt Cutting
- Roadway Repairs
- Sidewalk & Curb Installation
- Expansion Joints
- Utility Trenching
- Pavement Maintenance
- Commercial & Municipal Construction
| Specification | Details |
|---|---|
| Weight | 21 lbs. (9.6 kg) (without bar & chain) |
| Bar Length | Up to 16” (40 cm) |
| Maximum Cutting Depth | Up to 16” |
| Engine Type | 2-Stroke, Single Cylinder, Air-Cooled |
| Horsepower | 6.4 HP @ 9,000 RPM |
| Displacement | 94 cc (5.7 cu. in.) |
| Engine Speed | 11,500 ± 500 RPM |
| Idle Speed | 2,500–2,800 RPM |
| Fuel Mix Ratio | 50:1 (2%) Fuel-to-Oil |
| Water Supply | Minimum 20 PSI (1.5 Bar) |
| Powerhead Dimensions | 19” L × 14” H × 12” W (48 × 36 × 30 cm) |
